The feed moisture meter is designed with the principle of pyrolysis component, which is a new type of rapid moisture detection instrument in the feed industry. While the feed moisture meter measures the sample component, the infrared heating unit and the moisture evaporation channel quickly dry the sample. During the drying process, the moisture meter continues to measure and immediately displays the moisture content% of the sample. After the drying process is completed, the final measured moisture The content value is determined and displayed. Compared with the international oven heating method, infrared heating can reach the maximum heating power in a short time, the sample is quickly dried at high temperature, and its detection results have excellent consistency with the national standard oven method, with replaceability, and far detection efficiency Far higher than the oven method. Normal samples can be measured in just a few minutes.

Effect of moisture on feed

The moisture content of feed is a very important quality index, which directly affects the quality of feed and the economic benefits of processing enterprises. It is one of the key points to ensure the safety of feed production quality by effectively manipulating it. If the moisture content exceeds the rules and regulations, the feed is easily moldy and decayed, which is not conducive to preservation. It will also reduce the content of nutrients and reduce the energy of the feed. Too low a moisture content will affect the taste of the feed and cause excessive weight loss The economic benefits of enterprises have dropped significantly. In the process of feed processing, the appropriate moisture content is conducive to granulation, which can improve the processing quality and production efficiency of feed products and reduce processing costs. How to control the moisture content of feed has become a common concern of feed processing enterprises.

Feed Moisture Meter Features

The feed moisture meter can reach the maximum heating power in a short time. The operation is simple and the test is accurate. The red digital tube is used for the display part. The display value is clearly visible. , Initial temperature value, final value and other data, and has the function of connecting with computer and printer. General products can be tested in 3-5 minutes.

1. Small size and light weight

2. Fast and accurate detection

3. Simple operation and accurate test

4. The display part uses red digital tube display

5. Widely used