欢迎光临英特捷,微信号:13960061603~


Banner
Home > news > Content
Advantages and maintenance of online infrared moisture meter
- 2020-04-02-

The online infrared moisture meter is planned using the principle of pyrolysis component. This is a new type of rapid moisture detection instrument. When the sample is detected, the infrared heating unit and the moisture transpiration channel are used to quickly dry the sample. During the drying process, online The infrared moisture meter will immediately display the moisture content of the sample.


Compared with the online infrared moisture meter and the world oven heating method, its advantage is that it can complete the heating power in a short time, and the test results have good consistency with the national standard oven method.


In order to extend the service life of the online infrared moisture meter, in order to prolong its service life, it is necessary to regularly check the analyzer, followed by the related parts of the instrument, which should be timely Adjust the sensor on the bottom of the instrument to protect the screws.


1. Wide range of applications, can be used for medium and high density board, particle board, coke, paper, tobacco, food, glass, pellets, sintering, film, plastic, feed, chemical products, grease, ceramics, mineral products and other industries Online determination.

2. Non-contact, and fast response The traditional method of measuring the moisture content in the material is the oven method. The disadvantage is that it requires more operation time and lags behind the actual moisture change of the production line, so this method cannot be applied to The production line can only be used in the laboratory. The M-100 infrared moisture meter can quickly and continuously measure on the conveyor belt, and the non-contact measured material realizes online dynamic real-time detection, the reaction time is only 8ms, and real-time control of product moisture content is realized.

3. Multi-channel setting, the same instrument meets the needs of measuring different types of materials. The M-100 infrared moisture meter has 10 channels, numbered from 1-10, each channel number represents a group of the above channel parameters, change the channel number, that is Different channel parameters have been selected to meet the needs of the same instrument for measuring different types of materials.



Service Hotline05962057112

Contact address: Guangming Building 3, No.1 Jingtan Road, Lantian Development Zone, Longwen District, Zhangzhou City, Fujian Province floor